ChemBrite Ind.

16323 - 130 Avenue,  Edmonton,  Alberta,  Canada,  T5V 1K5    Tel / Fax: (780) 474 5298



        Clean-Brite 215 - Acid Etch and Scale Remover



To our best knowledge, the information and recommendations contained herein are accurate and reliable.  However, this information and our recommendations are furnished without warranty, expressed or implied.  The manufacturer’s sole obligation shall be to replace the portion of the product proven to be defective.  The seller or manufacturer shall not be liable for any loss, damage or injury from the use or possession of this product.

Clean-Brite 215 contains Hydrofluoric acid, handle with caution especially when concentrated or heated.  Avoid contact with skin, eyes and clothing.  Use eye goggles and acid resistant protective clothing when handling or working with this product.  Store in plastic containers.

Clean-Brite 215 should be used at 10 - 50 % concentration in cold or warm water.  Fill a plastic container with water and add Clean-Brite 215 slowly with some agitation (Never add water to strong acid).  Apply the solution by brush or spray, allow the surface to develop a foam blanket, and then rinse with plenty of fresh water.  When used on carbon steel, rinse with inhibited alkaline soap like Clean-Brite 201 to prevent flash rusting.

Clean-Brite 215 is a strong acid etch and brightener designed for use on stainless steel, glass, ceramics and other chemically resistant materials.  Very effective for etching bath tubs prior to re-coating, removing stains and residues after paint stripping and etching glass or ceramics prior to painting or sealing.