ChemBrite Ind.

16323 - 130 Avenue,  Edmonton,  Alberta,  Canada,  T5V 1K5    Tel / Fax: (780) 474 5298



        Phos-Brite 250E - Iron Phosphating Compound  



To our best knowledge, the information and recommendations contained herein are accurate and reliable.  However, this information and our recommendations are furnished without warranty, expressed or implied.  The manufacturer’s sole obligation shall be to replace the portion of the product proven to be defective.  The seller or manufacturer shall not be liable for any loss, damage or injury from the use or possession of this product.

Phos-Brite 250E contains phosphoric acid.  Use gloves and goggles when handling this product in its concentrated form.  Spent solution can be flushed into the sewer after testing for acidity and heavy metal concentration.

PRESSURE WASHER OR STEAMER – use at 0.5 - 1 % at 150 ˚ F or higher.  Apply for 30-90 seconds, alternating sides to prevent streaking.

SPRAY OR TUNNEL WASHERS – use Phos-Brite 251 to avoid foaming problems.

DIP TANK – use at 1 - 10 %, at 150 - 200 ˚ F.  5-30 minutes exposure time is require, depending on the type of metal and coating weight desired.

To store phosphated parts for extended periods  (up to 5 years indoor), coat them in Phos-Brite 262.

Formulated for use in hot pressure washers and steamers, Phos-Brite 250E is a multi-metal iron phosphating compound designed to treat steel, aluminum, zinc and some colour metals prior to painting. This product:

1. Cleans the metal of oil, grease and dirt.
2. Removes oxidation from the metal surface.
3. Conditions the surface for phosphate deposit.
4. Deposits a controlled amount of phosphate on the surface.
5. Protects treated parts from corrosion.
6. Provides a base for paint adhesion or lubricant retention.

Phos-Brite 250E incorporates superior surfactants and activators to produce smooth and uniform phosphate coating on most common metals, including hot rolled steel. When properly applied, the phosphate coating will have a characteristic blue colour on cold rolled steel. On other metals it may be clear, gold or grey. Phos-Brite 250E cleans extremely fast ( 2-3 passes ), never over-phosphates at proper concentration and does not require rinsing when used below 1  %. Completely non-hazardous and biodegradable.